دسته: پمپ فشار متوسط چند منظوره
سایز : 18...140
فشار اسمی: 280 بار
حداکثر فشار: 350 بار
روش کار: مدار باز
ویژگی های پمپ پلانجر سری Rexroth A10VSO100:
1. برای یک- و دو-عملیات ربع (برای مدت کوتاهی قابل برگشت است)
2. برای عملیات تعمیر و نگهداری فشار طولانی مدت مناسب است
3. مناسب برای شروع / توقف عملیات
4. فن آوری مونتاژ چرخشی A10 بالغ
5. از طریق درایو شفت اختیاری است
ویژگی های پمپ پلانجر سری Rexroth A10VSO100:
◆Series 10
◆Specification 10180
◆Nominal pressure: 250/280bar
◆Peak pressure: 315/350bar
◆Open loop and closed loop
A10VSO100 is based on the A10 variable piston pump that has been tested in the market and has been well received by the market, and overcomes the problems of self-priming lubrication and pressure pulsation of traditional piston pumps at low speeds, and also has stable performance at speeds of 0 200rpm. Pressure characteristics, and very high efficiency in pressure maintaining operation (pressure holding), its minimum displacement range is wider than the current internal gear pump, the displacement is as low as 3cm³/r, and the maximum displacement can be as high as 180cm³/r.
The launch of A10VSO100 series products can be described as "from the classics, follow the trend, better than the mainstream", its wider product specifications can meet the needs of most of the market, for models with high pressure, small flow and long pressure holding time It can achieve better energy saving, emission reduction and noise reduction effects, thereby bringing real economic benefits to customers. A10VSO100 can be used in variable-speed drives of synchronous or asynchronous motors, and can also be used in other occasions where variable displacement is required. It can be widely used in injection molding machines, die-casting machines, rubber machines, presses, and general machinery industries.
